Tip Screenout Fracturing: A Technique for Soft, Unstable Formations (SPE 13273)
The theory and application of TSO fracturing was first demonstrated in the soft North Sea chalks in 1984. Wider fractures achieved with TSO designs showed sharply increased productivity.
Several special stimulation techniques have been proposed for soft, unstable formations. One example is a combination of acid and proppant, which leaves the acid channels full of sand. This paper proppant, which leaves the acid channels full of sand. This paper discusses an alternative completion technique that involves only normal sand fracture procedures and is effective where acid is ineffectual or undesirable. Because the procedure is aimed primarily at creating short, high- conductivity fractures in soft formations, its use can be extended to any formation where such a treatment is practical and economically feasible. The fracture design is based on intentionally screening out the tip of the fracture with sand and then continuing to pump slurry to increase the fracture width and to pack the fracture with proppant to obtain high conductivity. Because this involves severe risk of a premature screenout, and because failure to achieve the tip screenout will not yield the desired stimulation, special prefracture tests are required to determine fracture design variables. The implementation and analysis of these tests are discussed, along with the theory behind the fracture design schedule. This theory is then compared with fracture pressure data and production performance from two wells completed in an Upper Cretaceous production performance from two wells completed in an Upper Cretaceous chalk formation in the Norwegian Sector of the North Sea.
Category 1: CARBO Benefits Improved Frac Conductivity,Oil Wells
Sub Category 1: 6,000 - 10,000 ft depth
Paper Number: SPE 13273
Return to Resources Search Page